2×4 Adirondack chair plan | Detailed Plan | Diagrams | Steps | Front & Side View | Free PDF Download | DIY
Adirondack chairs are great for relaxing in the summer, basking in the sun and spending time with your friends and family. While there are numerous Adirondack chairs options available in the market, they not always satisfy the needs. And sometimes the chairs that check all our boxes are simply out of our budget.
Hence If you are good with the woodwork, we got a 2×4 Do it yourself (DIY) Adirondack chair plan for you which you can follow. The instructions should be followed carefully for the best results. Scroll Down to Bottom to Download 2×4 Adirondack Chair Plans.
Step 1: Tools needed For 2×4 Adirondack Chair | Cutting Layout
- For legs, we need two 2×4 lumber pieces which are 14 1/2″ long and 2 pieces which are 20 3/8″ long
For supports 2 pieces of 2×4 lumber are needed which would be 20 1/4″ long and 1 piece of lumber which is 14 1/2″ long
For the seat, we need 5 pieces of 2×4 lumber which are 17 1/2″ long
For backrest, we need 5 pieces of 18″ long lumber and 1 piece of 2×4 lumber which would be 14 1/2″ long
Other materials that would be required are:
- Compound miter saw
- Tape measure
- An impact screwdriver
- 100 Screws (2 ½ inches)
- Safety gloves
- Wood filler and wood glue
- 2 inch Brad’s nails
Step 2: Measure Dimensions of the Adirondack Chair
There is no set dimension for the DIY 2×4 Adirondack chair that you need to follow. Hence it is advised to make them up the dimensions according to your needs as you proceed with the construction. You can also use an old Adirondack chair as your base. You need a chair that is strong and durable, hence we would advise going for treated lumber. However, if you wish to paint the chair, opt for untreated framing lumber.
|Estimated Cost||$20 - $40|
|Tools||As mentioned in PDF|
Step 3: Making The 2×4 AdirondackChair & Modelling
First, we need to build the front legs. Using the miter saw, cut the lumber at 85 degrees. Smooth it using sandpaper for a more refined look. For back legs, cut one at 87 degrees and the other at 67 degrees.
For building the sides, fit the supports to the legs. After aligning the edges, drill holes through those supports and insert 2 ½ inch screws into them. You can also add glue for a more strong frame.
To the front of the chair, fit a 2×4 and at 14 ½” cut through support. At both ends of the side support, drill holes and insert 2 1/2 “ screws. Now attach the slats to the seat of the chair. There should be no gap left between the slats and drill holes at both ends and insert 2 ½” screws.
Now we need to make support for the backrest. At both ends, drill holes and attach them to the back legs using 2 ½ inch screws. Using glue will give it a more professional look. The backrest has to be assembled now. Holes should be drilled to the slats. Now put them on a flat surface, align the edges and fasten them together and insert 2 ½ “ screws in them for assembling.
Now on the frame of the chair fit the backrest and align the edges. Through the backrest support again drill holes and insert 2 ½” screws in the slats. Your chair is now finished.
All left is to add final touches to your 2×4 Adirondack chair. Smooth the surface using sandpaper and fill holes with wood putty. If you wish to paint your chair, do the same. Apply a few coats of the paint for better protection. If you do not wish to paint the chair and go with the natural look, you can also apply a few coats of stain on it.
Cost of Building 2×4 Adirondack Chair
A normal wood Adirondack chair’s price starts from $100 and a good quality chair can easily cost you somewhere around $200. Our DIY Adirondack chairs plan will cost you around $30 to $40 which is quite a steal. If you are on a budget, this is going to be the right option for you. Learn how to build an Adirondack chair.
Download Chair Plan in PDF
Make sure you also download our 2×4 Adirondack Chair Plans FREE. Credit our blog in case you are building a chair and use the contact us form to submit the chairs you made so that we can display it on our blog. The plan we discussed here can be followed even for a beginner who loves to build this chair. Make sure to also check double Adirondack chair plans.
This 2×4 chair is strong, durable and will last longer. It will look beautiful in your backyard. By devoting a few hours of the day, you have been able to make a beautiful Adirondack chair which cost you much less than wooden chairs available in the market. The Adirondack chairs are extremely simple to make as well. All you need is some basic knowledge of carpentry and you are good to go.